Got a conversion to do? Building project? Got questions? Need Answers? Offering a product or service? Visit our forum...

My Barn Conversion

Login

canadian pharmacy
About | Shop | Privacy | Forum | Gallery | Contact Us

Building Progress ~ January 2012

Category: Barn Conversion Journal February 6th, 2012 by mbc

…finishing touches…

Some finishing touches were required to the cabin bed and boxing-in in the second bedroom – here it is in its pretty much completed (there’s always something else I want to fiddle with to get it just right) and fully ‘dressed’ state.

From Barn Conversion 2012

I then started work on some of the finishing touches that need to be made to the internal finishes:

Cosmetic pointing: Two of the most disruptive things we did to the barn in its conversion were to put in two doorways (one each at ground and first floor level) from the main full height section of the barn into the smaller, two storey section that now houses the kitchen (on the ground floor) and a bedroom (on the first floor). These doorways go through an internal wall that has been left as dressed stone on one side and bag pointed on the other. The violence of cutting the openings had cracked some of the mortar so some touching-up and filling of cracks with a carefully blended lime mortar was in order.

Tiling the window sills: With somewhat untidy / unfinished window sills and some left-over travertine mosiac & small brick shaped tiles there seemed to be only one sensible thing to do – tile the sills and in so doing tidy up the sills and finish off the tiles. It was also a nice job to occupy me over a couple of cold, damp January weekends.

Posted in Barn Conversion Journal | No Comments » « Leave Yours
Tags: , , , , , ,

Cabin bed build ~ part 3, finishing touches

Category: Barn Conversion Journal January 19th, 2012 by mbc

Continued from Part 1 & Part 2

With the main structure safe and solid it was time to add some finishing touches.

I’d wanted the bed to have it’s own lighting so went for LED strip lights from the ‘large blue Swedish chain store’. Two packs of four lights for a total of eight provided ample to surround the bed on three sides. The LED’s were hidden behind boards attached horizontally around the bed a metre or so up from the mattress level. Some extra smaller diameter bars of wood were attached to tidy things up, along the top of the short sides and along the bottom of the back. All of these parts were screwed and / or glued into place.

Some finishing around the opening into the bed was necessary, so I used my favoured coach bolts to attach a horizontal board along the front of the bed above the cupboards to fill the gap between the front top-edge of the bed and the mattress. This will be the ‘landing-area’ when climbing up onto the bed and so needs to be sturdy and hard wearing. I also fixed an additional upright to each side of the opening mainly to hide the end of the boards that cover the lighting.

From Barn Conversion 2012

There is a hole in the plasterboard of the wall along the long side of the bed, where I’d cut through to give me access to the masonry of the real wall in order to drill through to get the TV aerial into the barn. I filled the hole and then used some oak boards that were left over from the floor to cover both ends of the wall along the long side of the bed. As this was to be a pirate cabin bed, I used this boarding to accommodate a couple of eBay purchases – a small ships wheel and a port hole (where did we buy such things before eBay came along?!). A couple of skull-and-cross-bone flags and the pirate pact was made…

From Barn Conversion 2012

I boarded-in the end between the bed and the thermal store with some ply. A high shelf to the top right and a lower shelf in the middle of the end board to the left, then door knobs drilled and screwed on the cupboards doors and the job was pretty well done.

From Barn Conversion 2012

I’m currently working on Sketchup plans of the bed and will publish those shortly.

Posted in Barn Conversion Journal | No Comments » « Leave Yours
Tags: , , ,

Cabin bed build ~ part 2

Category: Barn Conversion Journal January 11th, 2012 by mbc

Continued from Part 1

I was lucky when it came to fitting the cupboard doors under the bed as I’d sized the frame and the doors to fit and for once the plans and reality closely resembled one-another. With hinges fixed to the doors, they quickly and relatively easily screwed onto the frame. I then used twin roller catches at the top of the doors to hold them in place.

From Barn Conversion 2011

With the under-bed cupboard doors in place the next step was to add the second end to the bed, the one that would lie in the middle of the whole construction between the bed and the thermal store.

From Barn Conversion 2011

I’d already built the end frame and I simply attached it to the wall by a single hollow wall anchor cavity fitting and screwed it in one place to the bed frame. I wanted to ensure that the bed remained easily removable in case full access to the thermal store and associated equipment was required at a later date. (As a slight rather dull aside, I used piranha branded anchors which are excellent but I can no longer find – if anyone knows where to get some then please let me know.)

From Barn Conversion 2011

Next I worked across the front of the thermal store, preparing the frame for the large wardrobe doors that would close off the area. On the left I placed a vertical upright screwed to the stud work of the internal wall running up the full height of the door to the bottom of the boxed-in header tank. Then with a horizontal bar I married the wall attached vertical to the middle frame / end-frame of the bed and screwed and bolted it all together. Wherever possible I used coach bolts to fix the frame together, I bought some long, thin ones that allowed easy fixing through double layers of the 4×2’s. I prefer the finish that the rounded stainless steel coach bolt heads give over what are comparatively rather ugly screws.

Some further vertical boards were added to either side of the low cupboard doors to fill narrow gaps that had been left (not shown on the photograph below).

From Barn Conversion 2011

A final vertical upright was screwed into place to sit behind and between the two cupboard doors. I screwed the cupboard doors onto the frame, one fitted perfectly, the other not quite so well and will need some remedial work to conform to my exacting standards (hehe!). I then placed a further horizontal board to fill the gap between the frame and the wardrobe doors (not shown on the photograph below).

That completed the main structural work, leaving mainly cosmetic additions – I’ll cover those in part three.

Posted in Barn Conversion Journal | 1 Comment » « Leave Yours
Tags: , , ,

Building Progress ~ December 2011

Category: Barn Conversion Journal January 10th, 2012 by mbc

Due in-part to the warm, but wet weather and in-part by the desire to complete the work by the Christmas deadline I set myself, December has been dominated by work to box-in the thermal store and build a cabin bed in the second bedroom.

These subjects have already been pretty well covered elsewhere – I’ve drawn up plans and posted about the initial construction of the cabin bed. I’ll be writing in detail about finishing the cabin bed soon – there are just a few finishing touches to complete. I also hope to put together a set of generic Sketchup plans for building something similar. All-in-all it’s been a really enjoyable process, I’ve found working with timber to build a large, solid fixture to be really satisfying. As I could have predicted ahead of time, the least enjoyable aspect of the build (as anyone who follows me on Twitter where I’ve moaned plenty will already know) has been getting the two sets of wardrobe doors to hang straight and true (and they still don’t – that’s one of the main outstanding tasks).

But doors aside, I (& most importantly my son) are pretty happy with the results – the pirate ship / cabin bed is almost ready to sail. I’ll leave you with an image of the almost completed build…

From Barn Conversion 2011

Beside that I put up some kitchen blinds and salvaged a piece of wood that I’ll use as the basis for a high-level shelf in the kitchen. Pretty poor show really, but Christmas tends to slow down progress…

Happy New Year!

Posted in Barn Conversion Journal | No Comments » « Leave Yours
Tags: , , , ,

Cabin bed build ~ part 1

Category: Barn Conversion Journal December 22nd, 2011 by mbc

With plans in place, some success under my belt and a enthusiasm for cutting wood(!) I recently started work on a cabin bed for the second bedroom in the barn. The cabin bed build was a part of a larger project that included boxing-in the large thermal water store and all the associated pipe work, pumps and control boxes. For clarity, I’ll focus on the cabin bed in these posts and cover the boxing-in elsewhere.

I based my plans on some that I found on the web that I’ve since lost and in reality pretty much disregarded, but they gave me a start in terms of basic structure and materials. If I find the source of those plans I post a link later on. The basic structure is constructed from 4×2’s (or 95x44mm’s as they’ve become under the pressure of ‘de-imperialisation’), with the timbers mainly doubled up for strength. The bed frame itself is a 3’8″ by 6’6″ rectangular box – sized as such to easily accommodate a standard 3’x6’3″ mattress (mattresses still coming from a world in which the sun still never sets on the British empire). The bed sits between two full height frames.

I started construction with the two end frames. Both have similar dimensions, one being slightly shorter than the other to cope with the slightly differing ceiling heights on each side of the original roof beam. The two frames are shaped to fit into the sloped roofed.

The first end frame ~ From Barn Conversion 2011
From Barn Conversion 2011

I made three equally sized rectangles, screwed together two of them to form the top of the bed and then raised the top on legs again made from doubled up 4×2’s. All the doubled-up sections were screwed together. Most of the joins are screwed – either straight through from the face or using angled pocket hole joints. I also used metal brackets as the basis (to hold the timbers in place before face or angled screwing) and to strengthen some of the hidden joins.

From Barn Conversion 2011

I could have used far stronger and fancier joints than I did in assembling the bed. Dovetail or dado joints, would have given a more satisfying, ‘correct’ solution, but I was keen to get this build on track and complete it quickly and efficiently. Given more time I’d definitely go the more ‘correct’ route.

I then fixed the slats across the top of the bed frame on which the mattress will sit. These were simply cut to size and screwed in place with a appropriate gap between each.

From there, I fitted the cupboard doors to the front-face of the bed base. The doors are Shaker style doors bought online from Doors-Sincerely and although pricey I’m really pleased with them. The predrilled hinge holes have made them easy to fit. There is a little damage to one of the larger doors, but that is the risk of buying online and getting things delivered and it’s easily remedied.

From Barn Conversion 2011

In part 2 I go on to assemble these parts into something resembling a bed…

Posted in Barn Conversion Journal | No Comments » « Leave Yours
Tags: , , ,

Progress

Autumn 2013

Right that’s the summer over with, now I can get on with some real work without the distractions of other things (like holidays and playing with children, all that enjoyable stuff that gets in the way of progress)… With few major jobs (painting, boxing in – nasty stuff!) left inside, mainly fiddly things that need […]

I’m having a moan on twitter… https://twitter.com/barnconversion/status/368427314868396032

A lovely Flemish barn conversion

I love the interior of this conversion and the great use of horizontal slats on this conversion. I retains the essential ‘barnyness’ of the building… flemish-barn-by-arend-groenewegen-architect

Coming soon, my barn conversion guide… Interesting earthship greenhouse project on Kickstarter

I really like this Kickstarter project >> The Farm of the Future: Earthship-Inspired Greenhouse This project is “Prototyping the First 100% Off-The-Grid, Affordable, Low-Maintenance Greenhouse using Earthship Principles and Aquaponics“. If any of those words meaning anything to you you’ll be interested in the project if not, pass it by… It’s already funded so I […]

Barns

Barns Gallery on Remodelista

There is a lovely gallery of barn related inspirational photographs available on Remodelista.

Barns – the Long House

Situated on the North Norfolk coast, this is a building to admire…

Barns – the Balancing Barn

A stunning piece of architecture, although not entirely to my taste…

New fast-track planning permission for the development of barns proposed

The Daily Mail reports on a new fast-track route through planning controls for the conversion of barns…

De-assembled, re-assembled, re-cycled barns

“A bit like a private sector, modernising, repurposing St Fagan’s…”

Design

What is a shadow gap?

A shadow gap – a mysterious dark place between two plains…

Your barn conversion – "what you really wanted for yourself"

Thoughts on making YOUR barn conversion – "what you really wanted for yourself"

Building Regulations, Approved Documents Part D – Toxic substances

An overview of Building Regulations, Approved Documents Part D – Toxic substances

Building Regulations, Approved Documents – Part C Site preparation and resistance to contaminants and moisture

An overview of Building Regulations, Approved Documents – Part C Site preparation and resistance to contaminants and moisture

Building Regulations, Approved Documents – Part B Fire safety

An overview of Building Regulations, Approved Documents – Part B Fire safety

Architecture

Your barn conversion – "what you really wanted for yourself"

Thoughts on making YOUR barn conversion – "what you really wanted for yourself"

The Stirling prize 2012 winner – the Sainsbury Laboratory

The 2012 Stirling prize was won by a outsider, the Sainsbury Laboratory…

The Stirling prize 2012

I think that this years Stirling prize has some exciting projects on the shortlist…

Our engineers … our architects – Le Corbusier

The efficient, shiny world of construction in 1923…

Design in Storage

When designing a layout it’s easy to forget to plan for storage…

News

Green Deal slow beginnings?

Oh dear! The green deal hasn’t got off to a very auspicious start… As reported in the Telegraph today since it was launched nearly a year ago just 12 homes have taken advantage of the Green Deal with a few hundred more in the pipeline. 71,210 households had been assessed for Green Deal measures such […]

The property roller coaster – planning reform to be rethought

Eric Pickles vague compromise on planning reform keeps the house happy (for now).

Energy policy, smoke screens, fracking, confusion and big bucks

There seems to be only one thing that is certain in the world of energy policy and that is that costs will rise annually above and beyond anything that inflation can currently throw at us. Beyond that, smoke screens & confusion seem to reign. Take the recent news for example… It’s reported today that the […]

Flanking manoeuvres and good design…

It seems that the government are undertaking flanking manoeuvres on the green belt…

Green Deal Launch

The Green deal launched in the UK on Monday of this week. Fanfares? fireworks? a deluge of marketing? … read more …

Plaid Cymru’s Green New Deal promise

The leader of Plaid Cymru has promised a “Green New Deal” to rejuvenate the Welsh economy and help maintain Wales’ position at the forefront of Green policies.

Permitted development extension limits to be doubled

The government is due to announce a temporary increase in the maximum depth of extensions that can be built under permitted development rules.

Lloyd Khan, making shelter simple.

I wanted to share an interview with Lloyd Khan that I recently found…

Just what is ‘sustainable development’?

Sustainable development – with the term now enshrined in planning law, what does it mean?

Sir Patrick Abercrombie – “It is a matter for serious thought…”

While reading up on the response of the Campaign to Protect Rural England (CPRE) to the National Planning Policy Framework (NPPF) I came across this quote from Sir Patrick Abercrombie…